Frig VxWorks Front end boot parameter settings. As of Sept. 18, 2001. Note that not all nodes have a "gateway inet" set (or the required accompanying mask :ffffff00 on the "inet on ethernet"). There isn't any real reason for this. They all could and probably should have this set. Some don't have it dating back to the beginning of 2001 when I was trying to figure out some other problem. Apparently the gateway didn't get re-set for the all the nodes. IP numbers, etc. are current as of Sept. 2001. You would be well advised to double check them before using them. friga boot device : dc0 processor number : 0 host name : fecode-bd file name : vxworks_boot/fe/frig/2400/vxWorks inet on ethernet (e) : 131.225.127.80 inet on backplane (b): host inet (h) : 131.225.121.145 gateway inet (g) : user (u) : vxworks_boot ftp password (pw) (blank = use rsh): flags (f) : 0x8 target name (tn) : friga_0xb19 startup script (s) : other (o) : frigb boot device : dc0 processor number : 0 host name : fecode-bd file name : vxworks_boot/fe/frig/2400/vxWorks inet on ethernet (e) : 131.225.127.81 inet on backplane (b): host inet (h) : 131.225.121.145 gateway inet (g) : user (u) : vxworks_boot ftp password (pw) (blank = use rsh): flags (f) : 0x8 target name (tn) : frigb_0xb1a startup script (s) : other (o) : frigc boot device : dc0 processor number : 0 host name : fecode-bd file name : vxworks_boot/fe/frig/2400/vxWorks inet on ethernet (e) : 131.225.127.82:ffffff00 inet on backplane (b): host inet (h) : 131.225.121.145 gateway inet (g) : 131.225.127.200 user (u) : vxworks_boot ftp password (pw) (blank = use rsh): flags (f) : 0x8 target name (tn) : frigc_0xb1b startup script (s) : other (o) : frigd boot device : dc0 processor number : 0 host name : fecode-bd file name : vxworks_boot/fe/frig/2400/vxWorks inet on ethernet (e) : 131.225.128.159:ffffff00 inet on backplane (b): host inet (h) : 131.225.121.145 gateway inet (g) : 131.225.128.200 user (u) : vxworks_boot ftp password (pw) (blank = use rsh): flags (f) : 0x8 target name (tn) : frigd_0xb1c startup script (s) : other (o) : frige boot device : dc0 processor number : 0 host name : fecode-bd file name : vxworks_boot/fe/frig/2400/vxWorks inet on ethernet (e) : 131.225.128.161:ffffff00 inet on backplane (b): host inet (h) : 131.225.121.145 gateway inet (g) : 131.225.128.200 user (u) : vxworks_boot ftp password (pw) (blank = use rsh): flags (f) : 0x8 target name (tn) : frige_0xb1d startup script (s) : other (o) : frigf boot device : dc0 processor number : 0 host name : fecode-bd file name : vxworks_boot/fe/frig/2400/vxWorks inet on ethernet (e) : 131.225.128.162 inet on backplane (b): host inet (h) : 131.225.121.145 gateway inet (g) : user (u) : vxworks_boot ftp password (pw) (blank = use rsh): flags (f) : 0x8 target name (tn) : frigf_0xb1e startup script (s) : other (o) : frigpr boot device : dc0 processor number : 0 host name : fecode-bd file name : vxworks_boot/fe/frig/2400/vxWorks inet on ethernet (e) : 131.225.124.123:ffffff00 inet on backplane (b): host inet (h) : 131.225.121.145 gateway inet (g) : 131.225.124.200 user (u) : vxworks_boot ftp password (pw) (blank = use rsh): flags (f) : 0x8 target name (tn) : frigpr_0xa03 startup script (s) : other (o) : frigsy boot device : dc0 processor number : 0 host name : fecode-bd file name : vxworks_boot/fe/frig/2400/vxWorks inet on ethernet (e) : 131.225.127.28 inet on backplane (b): host inet (h) : 131.225.121.145 gateway inet (g) : user (u) : vxworks_boot ftp password (pw) (blank = use rsh): flags (f) : 0x8 target name (tn) : frigsy_0xB2A startup script (s) : other (o) : frigbr boot device : dc0 processor number : 0 host name : fecode-bd file name : vxworks_boot/fe/frig/2400/vxWorks inet on ethernet (e) : 131.225.127.27:ffffff00 inet on backplane (b): host inet (h) : 131.225.121.145 gateway inet (g) : 131.225.127.200 user (u) : vxworks_boot ftp password (pw) (blank = use rsh): flags (f) : 0x9 target name (tn) : frigbr_0xae5 startup script (s) : other (o) :