Deb Baddorf
February 15, 1999
Backup save sets of EPICURE nodes are done to 8mm tapes. A batch job is run each morning at about 3:00 a.m. on each node to do the backup. Backups should be finished by 7:00 and tapes can usually be changed after that time. The only operator task required is to change the tape every day, so that the next save does not over-write the previous one.
Find the 8mm's in the rotating saves rack with the oldest date marked on them. For each 8mm tape:
Please replace each tape with another with the correct node name. Record the date on the sticker on each box, and put the tapes back in the storage rack.
Keywords: RDCS, EPICURE, controls, backup, save, tape
baddorf@fnal.gov