dio_is_abort(_c)

	status.i4.v = dio_is_abort(device_index.i4.r, alarm_type.i4.r,
				   abort_state.i4a.r [,ftd.i2.r]
				   [,start_block.i4.r] [,max_blocks.i4.r]
				   [,num_blocks.i4.r])

	status.i4.v = dio_is_abort_c(device_index.i4.v, alarm_type.i4.v,
				     abort_state.i4a.r [,ftd.i2.v]
				     [,start_block.i4.v] [,max_blocks.i4.v]
				     [,num_blocks.i4.r])

	This routine determines whether or not a device triggers an abort
	when it is in alarm.  A returned value of TRUE means the device
	triggers an abort.

	device_index	device index of interest
	alarm_type	type of alarm
			(DIO_ANALOG -> analog alarm,
			 DIO_DIGITAL -> digital alarm)
	abort_state	returned abort state
			(DIO_ABORT_ALARM -> abort capability exists,
			 DIO_NONABORT_ALARM -> abort capability does not exist,
			 DIO_INVALID_DATA -> error occurred in reading data)
	[ftd]		frequency time descriptor
			(FTD_ONESHOT -> one shot (default),
			 FTD_DEFAULT -> use database default FTD,
			 FTD_1HZ -> 1 Hz request,
			 FTD_EVENT_MASK OR'ed with TCLK event value -> read
			 on TCLK event (event constants are in tclk_events)
			 (can use the macro BUILD_EVENT_FTD(event) or
			  BUILD_EVENT_PLUS_DELAY_FTD(event,delay) in 'macro'))
	[start_block]	starting block to return (starts at 0)
			(default is 0) (maximum is DIO_MAX_ALARM_BLOCKS - 1)
	[max_blocks]	maximum number of blocks to return per device
			(default is 1) (maximum is DIO_MAX_ALARM_BLOCKS)
	[num_blocks]	returned number of blocks returned (default is NULL)

	This function returns ACNET status values as follows:

	OK			success
	otherwise		ACNET format error

	This function requires the following include files:

	cnsparam_h, diolib_h, acnet_errors_h, tclk_events_h, macro_h

	Related functions:

	dio_is_abt_lst, dio_enable_abort(_c), dio_disable_abort(_c),
	dio_is_abrt_inh(_c), dio_is_bypas(_c), dio_is_good(_c),
	dio_alarm_flags(_c), dio_is_broken_c, dio_extract_alarm_info_c

	C/C++ usage:

	short	ftd = FTD_ONESHOT;
	int	status;
	int	device_index = 14430;
	int	alarm_type = DIO_ANALOG;
	int	abort_state;
	int	start_block = 0;
	int	max_blocks = 1;
	int	num_blocks;

	status = dio_is_abort_c(device_index,alarm_type,&abort_state,ftd,
				start_block,max_blocks,&num_blocks);