dio_is_good_lst

	status.i4.v = dio_is_good_lst(list_id.i4.r, alarm_states.i4a.r,
				      errors.i2a.r [,hi_low_flags.i4a.r])

	This routine determines whether or not a list of devices are in alarm.
	A returned value of TRUE means the corresponding device is not in
	alarm.  This list must have been built by a previous call to
	dio_build_alarm_list_c.

	list_id		list ID returned from previous call to
			dio_build_alarm_list_c
			(Note:  This value will be set to zero if the
			 list is deleted.)
	alarm_states	array of returned alarm states
			(DIO_NOT_IN_ALARM -> device is not in alarm,
			 DIO_IN_ALARM -> device is in alarm,
			 DIO_INVALID_DATA -> error occurred in reading data)
	errors		array of returned ACNET status values
	[hi_low_flags]	array of returned flags containing additional
			information about analog alarms
			(DIO_ALARM_OK -> not in alarm,
			 DIO_ALARM_BAD -> device is in alarm,
			 DIO_ALARM_HIGH -> device is alarming high (analog),
			 DIO_ALARM_LOW -> device is alarming low (analog))

	This function returns status values as follows:

	OK			success
	DIO_MEMFAIL		memory allocation failure
	DIO_NOLIST		requested list does not exist
	negative value		ACNET format error indicating overall failure
	positive value		number of devices in error indicating partial
				success

	This function requires the following include files:

	cnsparam_h, diolib_h, acnet_errors_h

	Related functions:

	dio_build_alarm_list_c, dio_bld_alrm_lst, dio_is_good(_c),
	dio_is_byp_lst, dio_is_abt_lst, dio_is_abtinh_lst, dio_alarm_flags_list,
	dio_is_broken_c, dio_extract_alarm_info_c,
	dio_extract_read_list_status_c, error_in_list(_c)

	C/C++ usage:

	short	errors[NUM_DEVICES];
	int	status;
	int	list_id;
	int	alarm_states[NUM_DEVICES];
	int	hi_low_flags[NUM_DEVICES];

	status = dio_is_good_lst(&list_id,alarm_states,errors,hi_low_flags);