dio_was_set_c

	status.i4.v = dio_was_set_c(device_indices.i4a.r, properties.i2a.r,
				    start_time.u4.v, end_time.u4.v,
				    options.u4.v, was_set.i4a.r,
				    num_devices.i4.v)

	This routine determines whether or not a list of devices was
	was set in a particular time period.

	device_indices	array of device indices to check
	properties	property index or array of indices
			(PRSET -> setting property,
			 PRBCTL -> basic control property,
			 PRANAB -> analog alarm block,
			 PRDABL -> digital alarm block)
			(If the first value is less than zero, all devices
			 will be requested with a property index which is
			 equal to the absolute value of this argument.)
			(constants are in 'dbprops')
	start_time	start time in clinks (seconds since January 1, 1972)
	end_time	end time in clinks (seconds since January 1, 1972)
			(If a value of 0 is passed for this argument,
			 the end time will be the time this routine is called.)
	options		options (not used)
	was_set		returned array of setting values
			(TRUE -> device was set,
			 FALSE -> device was not set)
	num_devices	number of devices

	This function returns status values as follows:

	OK			success
	DIO_BADARG		invalid number of devices or property passed
	negative value		ACNET format error indicating overall failure

	This function requires the following include files:

	cnsparam_h, diolib_h, acnet_errors_h

	Related functions:

	dio_was_controlled_c, dio_set_raw(_c), dio_set_dev(_c), dio_set_lst,
	dio_set_lst_raw(_c), dio_cntrl_dev(_c), dio_cntrl_lst, dio_reset,
	dio_rst_lst, dio_on, dio_on_lst, dio_off, dio_off_lst, dio_positive,
	dio_pos_lst, dio_negative, dio_neg_lst, dio_set_ramp_mode_c,
	dio_set_ramp_mode_list_c, dio_set_dc_mode_c, dio_set_dc_mode_list_c

	C/C++ usage:

	static const short	properties[NUM_DEVICES] = {PRSET, PRSET};
	int	status;
	static const int	device_indices[NUM_DEVICES] = {4976, 4984};
	int	was_set[NUM_DEVICES];
	int	num_devices = NUM_DEVICES;
	unsigned int	start_time;
	unsigned int	end_time = 0;

	status = dio_was_set_c(device_indices,properties,start_time,end_time,
			       options,was_set,num_devices);