tcp_send_by_handle

	status.i4.v = tcp_send_by_handle(handle.g.v, message.g.v,
					 message_length.i4.v)

	This routine will send a message to the specified host and port.
	The program should have connected to this host and port by 
	calling tcp_connect_by_handle.

	handle		handle value (from call to tcp_connect_by_handle)
	message		TCP/IP message buffer
	message_length	size of message to be sent 

	This function returns ACNET status values as follows:

	OK			success
	CBS_INVID		not connected to this host and port
	CBS_GONE		this socket is not longer open
	CBS_TOO_BIG		not all the data was written to the socket

	This function requires the following include files:

	cbslib_h, acnet_errors_h

	Related functions:

	tcp_receive_by_handle, tcp_connect_by_handle, tcp_disconnect_by_handle,
	tcp_send, tcp_send_wait, tcp_receive, tcp_connect, tcp_disconnect

	C/C++ usage:

	static const char	tcp_host[] = "clxsrv";
	char	message[MESSAGE_LEN];
	int	status;
	int	tcp_port = 4353;
	int	message_length = MESSAGE_LEN;
	void	*handle;
	void	message_func(char *host, int port);

	status = tcp_connect_by_handle(tcp_host,tcp_port,&handle,message_func);
			.
			.
			.
	status = tcp_send_by_handle(handle,message,message_length);