multiwire_display_config_c (ul_multiwire)

	status.i4.v = multiwire_display_config_c(system_id.i4.v,
						 num_multiwires.i4.r,
					         selected_mw_config.sp.r)					      

	The routine will return multiwire configuration information for the
	requested system (display_index, mw_index, type, mw_name,
	number of horizontal wires, number of vertical wires,
	horizontal wire spacing and vertical wire spacing). If "system_id"
	has a value of CLIB_DEFAULT_ARG, this routine will display a
	directory of available multiwire systems and lets the user
	select one.

	system_id		multiwire system ID of interest
				(a value of CLIB_DEFAULT_ARG may be passed for
				user to select a system from a directory of
				multiwire systems)
	num_multiwires		number of MW_DSP_CONFIG_INFOR structures
				actually returned
	selected_mw_config	returned multiwire configuration of the selected 
				multiwire system
				(array of MW_DSP_CONFIG_INFOR structures)  
				(Note: This is a pointer to a buffer allocated by 
			 	this routine. The caller is responsible for freeing
			 	this buffer.)
				
	This function returns status values as follows:

	OK		success		
	negative value	ACNET format error indicating overall failure

	This function requires the following include files:

	ul_multiwire_h:multiwires_h, acnet_errors_h

	Related functions:

	multiwire_display_dir_select_c, multiwire_get_names_c,
	multiwire_menu_c, multiwire_get_data_c,
	multiwire_num_wires_c, multiwire_get_position_c,
	multiwire_set_position_c, multiwire_get_list_c,
	multiwire_cancel_get_lst, multiwire_get_scans_list_c,
	multiwire_detector_type_c, multiwire_get_power_status_c,
	multiwire_get_hv_status_c, multiwire_get_sequencer_status_c,
	multiwire_set_sequencer_status_c, multiwire_set_hv_status_c

	C/C++ usage:
	
	int		    status;
	int		    system_id = CLIB_DEFAULT_ARG;
	int		    num_multiwires;
	MW_DSP_CONFIG_INFOR *selected_mw_config;

	status = multiwire_display_config_c(system_id,&num_multiwires,
					    &selected_mw_config);