rtd720_set_range_c (ul_scopes)

	status.i4.v = rtd720_set_range_c(connect_info.g.v, channel.i4.v,
					 range.r8.v)

	This routine sets the range for an RTD720 series scope channel.

	connect_info	scope connection structure created by a
			prior call to scope_connect
	channel		channel to set (starts at 1)
			(If a value of SCOPE_ALL_CHANNELS is passed
			 for this argument, all channels will be set.)
	range		desired range value

	This function returns ACNET status values as follows:

	OK			success
	CLIB_SETLOCK		settings are locked
	CLIB_INVARG		invalid connection information passed
	CLIB_GENERIC_ERROR	error setting scope information
	otherwise		other ACNET error

	This function requires the following include files:

	ul_scopes_h:scopelib_h, ul_scopes_h:tekdefs_h, acnet_errors_h

	Related functions:

	rtd720_set_offset_c, rtd720_request_measurement, rtd720_reset_scope,
	rtd720_get_config_info, rtd720_get_waveform_c,
	rtd720_get_id_string_c, scope_connect, scope_disconnect, scope_info

	C/C++ usage:

	static const char	ip_name[] = "node_address.fnal.gov";
	int	status;
	int	channel = CHANNEL;
	double	range = RANGE_VALUE;
	void	*connect_info;

	status = scope_connect(ip_name,&connect_info);

	status = rtd720_set_range_c(connect_info,channel,range);

	status = scope_disconnect(&connect_info);