scope_get_config_info (ul_scopes)

	status.i4.v = scope_get_config_info(connect_info.g.v, config_data.g.v)

	This routine reads configuration information for a scope.

	connect_info	scope connection structure created by a
			prior call to scope_connect
	config_data	returned configuration data which depends
			on the model of scope being accessed
			(SCOPE_MODEL_TDS7154 -> structure of type
						TDS7000_CONFIG_DATA,
			 SCOPE_MODEL_TDS7404 -> structure of type
						TDS7000_CONFIG_DATA,
			 SCOPE_MODEL_DPO7254 -> structure of type
						TDS7000_CONFIG_DATA,
			 SCOPE_MODEL_LT224 -> structure of type
					      WAVERUNNER_CONFIG_DATA,
			 SCOPE_MODEL_RTD720 -> structure of type
					       RTD720_CONFIG_DATA)

	This function returns ACNET status values as follows:

	OK			success
	CLIB_NOTYET		scope model is not supported
	CLIB_INVARG		invalid connection information passed
	CLIB_GENERIC_ERROR	error reading scope information
	otherwise		other ACNET error

	This function requires the following include files:

	ul_scopes_h:scopelib_h, ul_scopes_h:tekdefs_h, acnet_errors_h

	Related functions:

	tds7000_get_config_info, scope_connect, scope_disconnect, scope_info

	C/C++ usage:

	static const char	ip_name[] = "myscope.fnal.gov";
	int	status;
	void	*connect_info;
	TDS7000_CONFIG_DATA	config_data;

	status = scope_connect(ip_name,&connect_info);

	status = scope_get_config_info(connect_info,(void *) &config_data);

	status = scope_disconnect(&connect_info);