waverunner_get_trigger_config_info_c (ul_scopes)

	status.i4.v = waverunner_get_trigger_config_info_c(connect_info.g.v,
							   source.i4.v,
							   config_data.s.r)

	This routine reads trigger configuration information for a
	Waverunner series scope.

	connect_info	scope connection structure created by a
			prior call to scope_connect
	source		trigger source to read
			(WAVERUNNER_TRIGGER_SOURCE_EXTERNAL -> external
							       (normal choice),
			 WAVERUNNER_TRIGGER_SOURCE_CH1 -> channel 1,
			 WAVERUNNER_TRIGGER_SOURCE_CH2 -> channel 2,
			 WAVERUNNER_TRIGGER_SOURCE_CH3 -> channel 3,
			 WAVERUNNER_TRIGGER_SOURCE_CH4 -> channel 4,
			 WAVERUNNER_TRIGGER_SOURCE_EXTERNAL_10,
			 WAVERUNNER_TRIGGER_SOURCE_ETM_10)
	config_data	returned trigger configuration data
			(structure of type WAVERUNNER_TRIGGER_CONFIG_DATA)

	This function returns ACNET status values as follows:

	OK			success
	CLIB_INVARG		invalid connection information or trigger passed
	CLIB_GENERIC_ERROR	error reading scope information
	otherwise		other ACNET error

	This function requires the following include files:

	ul_scopes_h:scopelib_h, ul_scopes_h:lecroydefs_h, acnet_errors_h

	Related functions:

	waverunner_get_config_info, waverunner_get_waveform_c,
	waverunner_enable_channel_c, waverunner_set_range_c,
	waverunner_set_offset_c,  waverunner_request_measurement,
	waverunner_reset_scope, waverunner_get_id_string_c,
	scope_connect, scope_disconnect, scope_info

	C/C++ usage:

	static const char	ip_name[] = "node_address.fnal.gov";
	int	status;
	int	source = SOURCE;
	void	*connect_info;
	WAVERUNNER_TRIGGER_CONFIG_DATA	config_data;

	status = scope_connect(ip_name,&connect_info);

	status = waverunner_get_trigger_config_info_c(connect_info,source,
						      &config_data);

	status = scope_disconnect(&connect_info);