abort_curr_source_control_c

	status.i4.v = abort_curr_source_control_c(command.i4.v,
						  device_indices.i4a.r,
						  inputs.i4a.r, errors.i2a.r
						  [,num_devices.i4.v])

	This routine turns abort concentrator module current sources
	on or off.

	command		current source operation
			(ABORT_SOURCE_ON -> turn on current source,
			 ABORT_SOURCE_OFF -> turn off current source)
	device_indices	device index or array of indices
	inputs		input number (1-8) or array of input numbers
			(A value of ABORT_ALL_INPUTS will result in all
			 channels being turned on or off.)
	errors		device error or array of errors
	[num_devices]	number of devices

	This function returns status values as follows:

	OK			success
	DIO_MEMFAIL		dynamic memory allocation failure
	DIO_BADARG		invalid input specification passed
	DIO_xxx			database or datapool error
	otherwise		number of database or datapool errors

	This function requires the following include files:

	ul_cbsaux_h:auxlib_misc_h, acnet_errors_h

	Related functions:

	abort_mask_control_c, abort_get_device_c, abort_mask_group_c,
	abort_system_info_c, abort_system_display_coords_c,
	abort_system_num_modules_c, abort_system_devices_c,
	abort_system_module_data_c, abort_system_reset_c,
	abort_read_single_module_c, abort_read_single_module_by_name_c,
	abort_loop_is_up_c

	C/C++ usage:

	short	errors[NUM_DEVICES];
	int	status;
	int	command = ABORT_SOURCE_ON;
	static const int	device_indices[NUM_DEVICES] = {139285, 24917};
	static const int	inputs[NUM_DEVICES] =
				{ABORT_ALL_INPUTS, ABORT_ALL_INPUTS};
	int	num_devices = NUM_DEVICES;

	status = abort_curr_source_control_c(command,device_indices,
					     inputs,errors,num_devices);