dio_bld_get(_c)

	status.i4.v = dio_bld_get(list_id.i4.r, num_devices.i4.r,
				  device_indices.i4a.r, properties.i2a.r,
				  errors.i2a.r [,ftd.i2.r] [,lengths.i2a.r]
				  [,offsets.i2a.r])

	status.i4.v = dio_bld_get_c(list_id.i4.r, num_devices.i4.v,
				    device_indices.i4a.r, properties.i2a.r,
				    errors.i2a.r [,ftd.i4.v] [,lengths.i2a.r]
				    [,offsets.i2a.r])

	This routine builds a list of device/property (DI/PI) requests for
	later retrieval with dio_get_lst, dio_sts_lst, or dio_sts_txt_lst.
	In general, lists should be segregated into reading/setting lists and
	basic status lists.  Do not use this routine for table devices
	(ramp cards, etc).  Use the routine td_build(_c) instead.

	list_id		returned list ID for subsequent use by dio_get_lst,
			dio_sts_lst, or dio_sts_txt_lst
	num_devices	number of devices
	device_indices	device index array
	properties	device property array (If the first value is less
			than zero, all devices will be submitted with the
			same property.  The property value used will be the
			absolute value of this argument.)
			(constants are in 'dbprops')
			(PRREAD -> reading property,
			 PRSET -> setting property,
			 PRBSTS -> basic status property)
	errors		array of returned ACNET status values
			(one for each device in the list)
	[ftd]		frequency/time that list data is collected
			(FTD_ONESHOT -> one shot (default),
			 FTD_DEFAULT -> use database default FTD,
			 FTD_1HZ -> 1 Hz request (Note: This value can be
				    multiplied by an integer constant to
				    retrieve data every "constant" seconds.),
			 FTD_EVENT_MASK OR'ed with TCLK event value -> read
			 on TCLK event (event constants are in 'tclk_events')
			 (can use the macro BUILD_EVENT_FTD(event) or
			  BUILD_EVENT_PLUS_DELAY_FTD(event,delay) in 'macro'))
	[lengths]	array of data lengths in bytes
			(default (0) is database minimum size)
	[offsets]	array of data offsets in bytes
			(default (0) is 0 bytes)

	This function returns status values as follows:

	OK			success
	DIO_MEMFAIL		memory allocation failure
	DIO_BADARG		invalid number of arguments passed
	negative value		other ACNET format error
	positive value		number of devices in error

	This function requires the following include files:

	dbprops_h, diolib_h, acnet_errors_h, tclk_events_h, macro_h

	Related functions:

	dio_get_device_list_c, dio_get_lst, dio_get_directed_list,
	dio_build_get_array_list_c, dio_sts_lst, dio_sts_txt_lst,
	dio_can_get_lst, dio_bld_get_raw(_c), td_build(_c), dio_bld_set(_c),
	dio_get_array_device_c, dio_get_array_device_double_c, dio_get_dev(_c),
	dio_get_raw(_c), error_in_list(_c)

	C/C++ usage:

	short		errors[NUM_DEVICES];
	short		properties = -PRSET;
	static short	lengths[NUM_DEVICES] = {0, 0};
	static short	offsets[NUM_DEVICES] = {0, 0};
	int		status;
	int		list_id;
	int		num_devices = NUM_DEVICES;
	static int	device_indices[NUM_DEVICES] = {14430, 14431};
	int		ftd = FTD_ONESHOT;

	status = dio_bld_get_c(&list_id,num_devices,device_indices,&properties,
			       errors,ftd,lengths,offsets);