dio_set_lst

	status.i4.v = dio_set_lst(list_id.i4.r, values.r4a.r, errors.i2a.r)

	This routine sets values for a list of devices previously setup with
	a call to dio_bld_set(_c).  Do not use this routine for table devices
	(ramp cards, etc).  Use the routine td_set(_c) instead.

	list_id		list ID returned from a prior call to dio_bld_set(_c)
	values		setting values
	errors		array of returned ACNET status values
			(one for each device in the list)

	This function returns status values as follows:

	OK			success
	DIO_NOLIST		requested list does not exist
	DIO_INVPROP		list contains properties which are not
				setting
	DIO_SETDIS		DIO settings are disabled
	DIO_NOSCALE		no scaling information available
	negative value		ACNET format error indicating overall failure
	positive value		number of devices in error indicating partial
				success

	This function requires the following include files:

	diolib_h, acnet_errors_h

	Related functions:

	dio_bld_set(_c), dio_can_set_lst, dio_set_device_list_c,
	dio_set_lst_raw(_c), td_set(_c), dio_get_lst, dio_set_list_length_c,
	dio_set_list_single_entry_info_c, dio_extract_set_list_status_c,
	error_in_list(_c)

	C/C++ usage:

	short		errors[NUM_DEVICES];
	int		status;
	int		list_id;
	static float	values[NUM_DEVICES] = {1.0, 2.0};

	status = dio_set_lst(&list_id,values,errors);