User Library UL_SCOPES Function Descriptions

Last updated:11-Dec-2017


hp3561_get_waveform - Gets trace data for the HP3561.
hp3561_init - Identifies the HP3561 instrument with a text string.
hp3561_marker_to_peak - Set the HP3561 marker to the peak value.
hp3561_read_marker - Reads the HP3561 marker postions and returns the x and y values
hp3561_read_source_values - Provides window for source control for HP3561.
hp3561_read_values - Reads the HP3561 currnet values for r span,c_freq and averages
hp3561_set_source_atten - Provides window for source control for HP3561.
hp3561_source_on - Provides window for source control for HP3561.
hp3561_source_window - Provides window for source control for HP3561.
hp35665a_get_plot_limits - Returns min and max vaules of scope screen coordinates
hp35665a_get_waveform - Gets trace data for an HP35665 spectrum analyzer.
hp54200_get_waveform - gets trace data for an HP54200 scope
hp54200_init - identifies the HP54200 instrument with a text string
hp54200_set_channel - user interface to remotely change channel associated settings
hp54200_set_timebase - user interface to remotely change timebase associated settings
hp54200_set_trigger - user interface to remotely change trigger associated settings
hp54500_change_dir - displays the disk directory of the HP54500 disk drive
hp54500_del_disk_file - deletes a file from disk on HP54500 series scopes
hp54500_display_wmem - displays locally an HP54500 scope channel from waveform memory
hp54500_format_disk - Formats the the disk for the HP54500 series scope.
hp54500_get_disk_dir - Displays the disk directory of the HP54500 disk drive.
hp54500_get_waveform - Gets traces data for an HP54500 scope
hp54500_init - Identifies the HP54500 instrument with a text string.
hp54500_load_from_disk - Writes setups,waveforms ect. to HP54500 disk.
hp54500_message - Writes a text string to the HP54500 scope locally at row, col.
hp54500_num_points - Sets number of points for a call to HP54500_get_waveform.
hp54500_num_screens - Returns channel on/off status and number of screens displayed.
hp54500_set_acquire - User interface to remotely change acqiure associated settings.
hp54500_set_channel - User interface to remotely change channel associated settings.
hp54500_set_display - User interface to remotely change display associated settings.
hp54500_set_root - User interface to remotely change timebase associated settings.
hp54500_set_timebase - User interface to remotely change timebase associated settings.
hp54500_set_trigger - User interface to remotely change trigger associated settings.
hp54500_set_utilities - User interface to remotely change utilities associated settings.
hp54500_set_waveform - User interface to remotely change waveform associated settings.
hp54500_store_wmem - Stores an HP54500 scope channel into waveform memory.
hp54500_write_to_disk - Writes a setup,waveformAt or a pixel memory to HP54500 disk.
hp54503_set_acquire - User interface to remotely change acqiure associated settings.
hp54503_set_timebase - User interface to remotely change timebase associated settings.
hp54503_set_trigger - User interface to remotely change trigger associated settings.
hp54503_store_wmem - Stores an HP54503 scope channel into waveform memory.
hp54600_display_pmem - Displays pixel or saved trace locally on HP54600 scope.
hp54600_get_plot_limits - Returns min and max vaules of scope screen coordinate
hp54600_get_pmem - Retrieves trace data from pixel memory from HP54600 scope.
hp54600_get_waveform - Gets trace data for an HP54600 scope
hp54600_message - Writes a text string locally onthe HP54500 scope at row, col.
hp54600_set_acquire - User interface to remotely change acquire associated settings.
hp54600_set_channel - User interface to remotely change channel associated settings.
hp54600_set_display - User interface to remotely change display associated settings.
hp54600_set_timebase - User interface to remotely change timebase associated settings.
hp54600_set_trigger - User interface to remotely change trigger associated settings.
hp54600_set_waveform - User interface to remotely change waveform associated settings.
hp54600_store_pmem - Stores an HP54600 scope channel into pixel memory.
hp89410a_get_waveform - Gets trace data for the HP89410a.
hp89410a_init - Identifies the HP89410a instrument with a text string.
hp89410a_marker_to_peak - Set the HP89410a marker to the peak value.
hp89410a_read_marker - Reads the HP89410a marker postions and returns the x and y values
hp89410a_set_mode - Sets the Pause and run mode for the HP89410a VSA.
hp_get_plot_limits - returns minimum and maximum values of scope screen coordinates
hp_get_waveform - Get trace data an HP54504 series scope.
hp_set_channel - user interface to remotely change channel associated settings.
hp_set_display - user interface to remotely change display associated settings
hp_set_root - user interface to remotely change root associated settings
hp_set_timebase - user interface to remotely change timebase associated settings
hp_set_trigger - user interface to remotely change trigger associated settings
hp_set_utilities - User interface to remotely change display associated settings.
hp_set_waveform - user interface to remotely change waveform associated settings
rtd720_get_config_info - reads configuration information for an RTD720 series scope
rtd720_get_id_string_c - retrieves the ID string for an RTD720 series scope
rtd720_get_string_c - retrieves a data string from an RTD720 series scope
rtd720_get_waveform_c - reads waveform data for an RTD720 series scope
rtd720_is_busy - checks to see if an RTD720 series scope is busy executing a request
rtd720_request_measurement - requests a measurement from an RTD720 series scope
rtd720_reset_scope - resets an RTD720 series scope
rtd720_set_display_position_c - sets the display position for an RTD720 series scope
rtd720_set_num_traces_c - sets the number of traces for an RTD720 series scope
rtd720_set_offset_c - sets the offset for an RTD720 series scope channel
rtd720_set_range_c - sets the range for an RTD720 series scope channel
rtd720_set_sample_rate_c - sets the sample rate for an RTD720 series scope
rtd720_set_trace_length_c - sets the trace length for an RTD720 series scope
rtd720_set_trigger_level_c - sets the trigger level for an RTD720 series scope
scope_connect - connects to a scope for future access
scope_connection_is_valid - checks for valid scope connection data
scope_disconnect - disconnects from a scope
scope_enable_channel_c - enables a channel on a scope
scope_get_config_info - reads configuration information for a scope
scope_get_edge_trigger_config_info_c - reads edge trigger configuration information for a scope
scope_get_id_string_c - retrieves the ID string for a scope
scope_get_module_id - retrieves the module ID from a scope connection
scope_get_string_c - retrieves a data string from a scope
scope_get_trigger_config_info_c - reads trigger configuration information for a scope
scope_get_trigger_coupling_convert_id - retrieves conversion type for a scope trigger coupling value
scope_get_trigger_mode_convert_id - retrieves conversion type for a scope trigger mode value
scope_get_trigger_slope_convert_id - retrieves conversion type for a scope trigger slope value
scope_get_trigger_source_convert_id - retrieves conversion type for a scope trigger source value
scope_get_trigger_type_convert_id - retrieves conversion type for a scope trigger type value
scope_get_waveform_c - reads waveform data for a scope
scope_info - returns scope information
scope_is_busy - checks to see if a scope is busy executing a request
scope_request_measurement - requests a measurement from a scope
scope_reset - resets a scope
scope_set_display_position_c - sets the display position for a scope
scope_set_edge_trigger_params_c - sets edge trigger parameters for a scope
scope_set_num_traces_c - sets the number of traces for a scope
scope_set_offset_c - sets the offset for a scope channel
scope_set_range_c - sets the range for a scope channel
scope_set_sample_rate_c - sets the sample rate for a scope
scope_set_trace_length_c - sets the trace length for a scope
scope_set_trigger_level_c - sets the trigger level for a scope
scope_set_trigger_type_c - sets the trigger type for a scope
tds7000_enable_channel_c - enables a channel on a TDS7000 series scope
tds7000_get_config_info - reads configuration information for a TDS7000 series scope
tds7000_get_edge_trigger_config_info_c - reads edge trigger configuration information for a TDS7000 series scope
tds7000_get_id_string_c - retrieves the ID string for a TDS7000 series scope
tds7000_get_string_c - retrieves a data string from a TDS7000 series scope
tds7000_get_trigger_config_info_c - reads trigger configuration information for a TDS7000 series scope
tds7000_get_trigger_coupling_convert_id - retrieves conversion type for a TDS7000 series scope trigger coupling value
tds7000_get_trigger_mode_convert_id - retrieves conversion type for a TDS7000 series scope trigger mode value
tds7000_get_trigger_slope_convert_id - retrieves conversion type for a TDS7000 series scope trigger slope value
tds7000_get_trigger_source_convert_id - retrieves conversion type for a TDS7000 series scope trigger source value
tds7000_get_trigger_type_convert_id - retrieves conversion type for a TDS7000 series scope trigger type value
tds7000_get_waveform_c - reads waveform data for a TDS7000 series scope
tds7000_is_busy - checks to see if a TDS7000 series scope is busy executing a request
tds7000_request_measurement - requests a measurement from a TDS7000 series scope
tds7000_reset_scope - resets a TDS7000 series scope
tds7000_set_display_position_c - sets the display position for a TDS7000 series scope
tds7000_set_edge_trigger_params_c - sets edge trigger parameters for a TDS7000 series scope
tds7000_set_num_traces_c - sets the number of traces for a TDS7000 series scope
tds7000_set_offset_c - sets the offset for a TDS7000 series scope channel
tds7000_set_range_c - sets the range for a TDS7000 series scope channel
tds7000_set_sample_rate_c - sets the sample rate for a TDS7000 series scope
tds7000_set_trace_length_c - sets the trace length for a TDS7000 series scope
tds7000_set_trigger_level_c - sets the trigger level for a TDS7000 series scope
tds7000_set_trigger_type_c - sets the trigger type for a TDS7000 series scope
tek3000_get_waveform - Get trace data from a TEK3000 series scope.
tek3000_init - Identifies the TEK3000 instrument with a text string.
tek3000_message - Writes a text string box locally on the TEk3000 scope at row, col.
tek_get_dir - Read Tek3052 directories.
tek_get_header - Reads the data header for the Tek3052.
tek_get_mode - Reads the Pause and run mode for the TEK3052.
tek_get_waveform - Read Tek3052 waveform. Possible 800 point X 500 frames.
tek_message - Send a text message to the TEK3052.
tek_set_mode - Sets the pause and run mode for the Tek3052.
tek_set_span - Read Tek3052 directories.
tek_switch_mode - Change TEK3052 data collecting mode to 489 card to VME.
tek_window_mess - Display a text message on the TEK3052.
waverunner_enable_channel_c - enables a channel on a Waverunner series scope
waverunner_get_config_info - reads configuration information for a Waverunner series scope
waverunner_get_id_string_c - retrieves the ID string for a Waverunner series scope
waverunner_get_string_c - retrieves a data string from a Waverunner series scope
waverunner_get_trigger_config_info_c - reads trigger configuration information for a Waverunner series scope
waverunner_get_trigger_coupling_convert_id - retrieves conversion type for a Waverunner series scope trigger coupling value
waverunner_get_trigger_mode_convert_id - retrieves conversion type for a Waverunner series scope trigger mode value
waverunner_get_trigger_slope_convert_id - retrieves conversion type for a Waverunner series scope trigger slope value
waverunner_get_trigger_source_convert_id - retrieves conversion type for a Waverunner series scope trigger source value
waverunner_get_trigger_type_convert_id - retrieves conversion type for a Waverunner series scope trigger type value
waverunner_get_waveform_c - reads waveform data for a Waverunner series scope
waverunner_request_measurement - requests a measurement from a Waverunner series scope
waverunner_reset_scope - resets a Waverunner series scope
waverunner_set_edge_trigger_params_c - sets edge trigger parameters for a Waverunner series scope
waverunner_set_num_traces_c - sets the number of traces for a Waverunner series scope
waverunner_set_offset_c - sets the offset for a Waverunner series scope channel
waverunner_set_range_c - sets the range for a Waverunner series scope channel
waverunner_set_trace_length_c - sets the trace length for a Waverunner series scope