UL_SCOPES (ul_scopes)

Scopes library
  This library contains routines that can be used to program
  Hewlitt Packard and Textronics scopes and spectrum analyzer
  using GPIB protocol.
UL_SCOPES one-liner help
  • hp3561_get_waveform
  • hp3561_init
  • hp3561_marker_to_peak
  • hp3561_read_marker
  • hp3561_read_source_values
  • hp3561_read_values
  • hp3561_set_source_atten
  • hp3561_source_on
  • hp3561_source_window
  • hp35665a_get_plot_limits
  • hp35665a_get_waveform
  • hp54200_get_waveform
  • hp54200_init
  • hp54200_set_channel
  • hp54200_set_timebase
  • hp54200_set_trigger
  • hp54500_change_dir
  • hp54500_del_disk_file
  • hp54500_display_wmem
  • hp54500_format_disk
  • hp54500_get_disk_dir
  • hp54500_get_waveform
  • hp54500_init
  • hp54500_load_from_disk
  • hp54500_message
  • hp54500_num_points
  • hp54500_num_screens
  • hp54500_set_acquire
  • hp54500_set_channel
  • hp54500_set_display
  • hp54500_set_root
  • hp54500_set_timebase
  • hp54500_set_trigger
  • hp54500_set_utilities
  • hp54500_set_waveform
  • hp54500_store_wmem
  • hp54500_write_to_disk
  • hp54503_set_acquire
  • hp54503_set_timebase
  • hp54503_set_trigger
  • hp54503_store_wmem
  • hp54600_display_pmem
  • hp54600_get_plot_limits
  • hp54600_get_pmem
  • hp54600_get_waveform
  • hp54600_message
  • hp54600_set_acquire
  • hp54600_set_channel
  • hp54600_set_display
  • hp54600_set_timebase
  • hp54600_set_trigger
  • hp54600_set_waveform
  • hp54600_store_pmem
  • hp89410a_get_waveform
  • hp89410a_init
  • hp89410a_marker_to_peak
  • hp89410a_read_marker
  • hp89410a_set_mode
  • hp_get_plot_limits
  • hp_get_waveform
  • hp_set_channel
  • hp_set_display
  • hp_set_root
  • hp_set_timebase
  • hp_set_trigger
  • hp_set_utilities
  • hp_set_waveform
  • rtd720_get_config_info
  • rtd720_get_id_string_c
  • rtd720_get_string_c
  • rtd720_get_waveform_c
  • rtd720_is_busy
  • rtd720_request_measurement
  • rtd720_reset_scope
  • rtd720_set_display_position_c
  • rtd720_set_num_traces_c
  • rtd720_set_offset_c
  • rtd720_set_range_c
  • rtd720_set_sample_rate_c
  • rtd720_set_trace_length_c
  • rtd720_set_trigger_level_c
  • scope_connect
  • scope_connection_is_valid
  • scope_disconnect
  • scope_enable_channel_c
  • scope_get_config_info
  • scope_get_edge_trigger_config_info_c
  • scope_get_id_string_c
  • scope_get_module_id
  • scope_get_string_c
  • scope_get_trigger_config_info_c
  • scope_get_trigger_coupling_convert_id
  • scope_get_trigger_mode_convert_id
  • scope_get_trigger_slope_convert_id
  • scope_get_trigger_source_convert_id
  • scope_get_trigger_type_convert_id
  • scope_get_waveform_c
  • scope_info
  • scope_is_busy
  • scope_request_measurement
  • scope_reset
  • scope_set_display_position_c
  • scope_set_edge_trigger_params_c
  • scope_set_num_traces_c
  • scope_set_offset_c
  • scope_set_range_c
  • scope_set_sample_rate_c
  • scope_set_trace_length_c
  • scope_set_trigger_level_c
  • scope_set_trigger_type_c
  • tds7000_enable_channel_c
  • tds7000_get_config_info
  • tds7000_get_edge_trigger_config_info_c
  • tds7000_get_id_string_c
  • tds7000_get_string_c
  • tds7000_get_trigger_config_info_c
  • tds7000_get_trigger_coupling_convert_id
  • tds7000_get_trigger_mode_convert_id
  • tds7000_get_trigger_slope_convert_id
  • tds7000_get_trigger_source_convert_id
  • tds7000_get_trigger_type_convert_id
  • tds7000_get_waveform_c
  • tds7000_is_busy
  • tds7000_request_measurement
  • tds7000_reset_scope
  • tds7000_set_display_position_c
  • tds7000_set_edge_trigger_params_c
  • tds7000_set_num_traces_c
  • tds7000_set_offset_c
  • tds7000_set_range_c
  • tds7000_set_sample_rate_c
  • tds7000_set_trace_length_c
  • tds7000_set_trigger_level_c
  • tds7000_set_trigger_type_c
  • tek3000_get_waveform
  • tek3000_init
  • tek3000_message
  • tek_get_dir
  • tek_get_header
  • tek_get_mode
  • tek_get_waveform
  • tek_message
  • tek_set_mode
  • tek_set_span
  • tek_switch_mode
  • tek_window_mess
  • waverunner_enable_channel_c
  • waverunner_get_config_info
  • waverunner_get_id_string_c
  • waverunner_get_string_c
  • waverunner_get_trigger_config_info_c
  • waverunner_get_trigger_coupling_convert_id
  • waverunner_get_trigger_mode_convert_id
  • waverunner_get_trigger_slope_convert_id
  • waverunner_get_trigger_source_convert_id
  • waverunner_get_trigger_type_convert_id
  • waverunner_get_waveform_c
  • waverunner_request_measurement
  • waverunner_reset_scope
  • waverunner_set_edge_trigger_params_c
  • waverunner_set_num_traces_c
  • waverunner_set_offset_c
  • waverunner_set_range_c
  • waverunner_set_trace_length_c
  •